Analog Trip

Mastering Services

Mastering Services
Link with premasters

10 Essential Tips to Prepare your Mix for Mastering

Posted by Looperman on 2012-01-19 in Tutorials12 COMMENTS58811 VIEWS
10 Essential Tips to Prepare your Mix for Mastering

Many mixing engineers and artists are unaware of the best way to prepare their songs for mastering.  The tips below cover some of the most common issues that mastering engineers run into with mixes.   Occasionally there are exceptions; however for the most commercially released projects these tips will help give your mastering engineer the best possible mix to work with.

Remove any Master Bus Compression, Limiting, and Equalization

Many times mixing engineers pre-master their tracks to get a better sound.  While the pre-master may sound better, adding processors to the master bus makes it difficult if not impossible for the mastering engineer to make a great master.  In rare instances engineers may use a special processor or plug-in on the master bus for effect.  If so, make sure to notify your mastering engineer when you send in the project.

Keep the Max Levels of Each Track Between -3db and -6db

By giving the mastering engineer enough headroom to work with he’ll be able to give you a better final master.  You don’t want to have clipping on any of the tracks in your mix.  It’s important to make sureEVERY TRACK has enough headroom.  Do not just lower the master bus, but every single track in your mix.


Eliminate Noise on the Mix

Mastering will make your song louder and bring out imperfections that may not be as noticeable on the mix.  If you can just hear it in the mix, you will definitely hear it in the master.  Remember to remove any pops, clicks, background noise, and anything else that is bothersome.  Mastering engineers can remove some noise; however you’ll get a much better master if you fix it in the mix.

Keep Your Mix Clean and Dynamic

Reduce frequency buildups that are not the main focus of the song. Frequency buildups can make a mix sound unclear or ‘muddy”. Using low-pass filters for instruments or vocals that have little low frequency content helps reduce these buildups. Leave your mix dynamic. Overuse of compression can take the life out of a song. This makes it difficult for the mastering engineer to create a great sounding master. It’s best to leave mixes as dynamic as possible. Doing so gives the mastering engineer space to sculpt the dynamics to create the best possible master.


Submit the Highest Resolution File You Have

You will want to make sure to submit your files in the same resolution they were mixed at.   Generally speaking you will want to submit a 24bit .WAV or .AIF file.  These files are lossless (non-compressed or converted) and will give the mastering engineer the best options when mastering.  Most any file can be mastered, but the final quality will suffer when using lossy formats such as MP3’s.


Submit Reference Songs and Notes

A good mastering engineer knows what commercial levels are and will be able to match your musical genre to these levels.  However within each genre there are often differences in equalization and compression.  Likewise many artists want a specific sound with their master.  For this reason it’s very helpful if you let the mastering engineer know any song references that have a similar sound you want.  Also adding notes is helpful so the engineer knows exactly what you want.  This can help reduce revisions and give you the exact sound you want.


Do Not add Fades, Cross Fades, or Spaces

Your mastering engineer will add song fades.   Leave this up to him and you’ll get a better final master.  If you have special requirements for spacing between tracks make sure to let your engineer know.  Redbook standard gap is 2 seconds.


Remove any Dithering

As with fades, dithering will be added by the mastering engineer.  If you’ve pre-mastered your track with dithering, or other plug-ins designed to “enhance” the sound you will want to remove them.  Dithering is best left to the mastering engineer to choose the correct settings for each song.


Reference Your Mix

Listen to songs that you want your mix to sound like.  It’s important to do this both during the mixing process and especially toward the end of the mix. Compare levels, compression, equalization, effect etc. This can give you a good idea of what you might want to fix, change, or modify. Also, listen to your mix on different playback systems such as your home stereo, car stereo, headphones, and even ear-buds. This will help you make adjustments so your song sounds it’s best to all your listeners.


Above All Make Sure Your Mix Sounds Like You Want

This is possibly the most important tip.  So often after mastering a song the artist will decide they are not happy with the way they mixed the track, or want a track replacement.  The re-mix will then require re-mastering.  Artists should remember that mastering is not a magic fix all and you’re not going to get a great final master if you don’t have a great mix.  As mentioned before mastering will bring out both the best and worst in your mix so it’s important to iron out everything possible before submission.  In addition many mastering engineers will charge a revision fee to re-master a song, and it can get expensive if you’re working with a good engineer.

About The Author

Sage Audio is a mastering studio in Nashville, Tennesseee on legendary Music Row.  Sage Audio provides professional cd mastering services for all genres and artists all over the world through an easy to use online system.

They also offer a free mastering preview for new artists so they can see exactly what their songs will sound like after professional mastering.

Get Your Tracks Mastered

The guys over at Sage Audio have teamed up with looperman and we earn a commision on any referals so should you decide to get your tracks mastered make sure to follow our affiliate links.

If you have any tracks mastered by Sage Audio do let us know how you got on and should you have any specific requests for articles leave a comment and we’ll create some more.


Leave a Reply